The polarising Cubitus collection is not yet a year old, but AAA replica Patek Philippe’s newest line of elegant sports watches has expanded in a big way with the Cubitus ref. 7128/1G-001 in a new ‘medium’ 40 mm size that transforms the wearing experience for the better. With summer now in full swing, it’s worth looking at this new Cubitus and considering what it means for the future of the collection.
Featuring a silky 18k white gold case and bracelet, the smaller best Patek Philippe Cubitus fake watches practically drapes itself on the wrist, and is probably the most compelling launch yet from the new collection. Also available in rose gold (ref. 7128/1R-001), the new “medium” Cubitus is a luxury sports watch in the true sense of the term, combining everyday comfort and wearability with premium materials and high-quality finishing inside and out.
Initial thoughts
When the Cubitus launched last year, it was decried by many spectators as an unworthy successor to the sought-after Nautilus. I freely admit I never had a strong affinity for the Nautilus, which might explain my open mind toward the Cubitus, but I really like the faceted eight-sided crystal and find the overall design about as compelling as that of its esteemed predecessor. That said, I do wish the high quality Patek Philippe Cubitus replica watches had more of a distinct identity of its own.
In the case of the current 1:1 copy Patek Philippe ref. 7128/1G-001 watches in 18k white gold, the influence of the Nautilus is most clearly seen in the horizontally embossed sunburst blue dial, lozenge-shaped hands, and the tapered H-link bracelet, which aren’t trying very hard to feel new.
The big news here is obviously the smaller 40 mm case, which should feel just right on most wrists. This sizing addresses one of the primary concerns about the ref. 5821/1A launched last year, which was that its 45 mm size was just too big for the design. I tend to agree, which is why I was excited to experience the medium size on the wrist.
At just 8.5 mm thick, the perfect Patek Philippe Cubitus replica watches is 0.3 mm thicker than the Nautilus ref. 5811/1G-001, but this difference is barely noticeable and it still drapes on the wrist like an elegant sport watch should thanks to its low center of gravity and supple bracelet.
The super clone Patek Philippe Cubitus watches for men is powered by the well-known automatic cal. 26-330 S C, which has served as the brand’s bread-and-butter full-rotor automatic movement since its introduction in 2019.
The movement is appealingly slim and ticks at 4 Hz, an appropriate rate for a sporty watch, but suffers from an underwhelming 45-hour power reserve. This weakness aside, it’s an attractive and accurate movement perfectly suited to a slim, sporty watch like the Cubitus.
With an MSRP of about US$80,000, the Cubitus is priced at a premium relative to its functional equivalents from Audemars Piguet and Vacheron Constantin. This is understandable given the evident quality of the Swiss made Patek Philippe replica watches and the evergreen strength of the Patek Philippe brand, but it will require a robust secondary market to feel like much of a value proposition.
A design that hinges on the bezel
With so many traits in common with the Nautilus, the identity of the China reproduction Patek Philippe Cubitus watches hinges on its squarish bezel and faceted crystal. Fortunately, these features are beautifully rendered, with impressively sharp transitions between brushed and polished surfaces, and crisp edges at each corner.
The resemblance is probably incidental, but the octagonal shape of bezel and crystal reminds me of the shape of Place Vendôme, the location of the Patek Philippe boutique in Paris.
That said, the brand’s decision to retain the signature hinged ‘ears’ of the Nautilus surprised me. The new octagonal shape is distinctly less porthole-like in its appearance, so the hinged design doesn’t feel necessary; a less familiar construction might have helped the design feel more fresh.
The Nautilus in gold always felt great on the wrist, and the AAA+ fake Patek Philippe Cubitus watches is no different, especially in this new 40 mm size. The case is quite thin at 8.5 mm, but it feels thinner because of its low center of gravity; the ‘ears’ on either side of the case keep most of the bulk close to the wrist.
The heavier the watch, especially a watch on a bracelet, the more important it becomes to find a perfect fit. The Swiss movements replica Patek Philippe Cubitus watches makes this pretty easy thanks to its micro-adjust clasp, first seen on the larger Cubitus models launched last year. Like the gold Nautilus models that came before it, the bracelet is thin, heavy, and silky.
Visually, however, the bracelet looks too much like that of a Nautilus. This isn’t necessarily a bad thing, since Gerald Genta’s original design has always ranked among the best-looking designs in the industry, but it arguably prevents the Cubitus from having an identity distinct from that of the Nautilus.
Another polarising aspect of the Cubitus is its 30 m water resistance rating, which popular wisdom suggests is too little for a watch with sporty aspirations. There’s been confusion about this point since Patek Philippe adopted new unified water resistance criteria. In essence, the brand’s new policy indicates that users should feel confident taking their Patek Philippe knock off watches paypal down to the stated depth.
I’d personally have no qualms taking a well-maintained Cubitus in the water, given it shares its case construction and screw-down crown with the Nautilus which, until the change in the rating system, was rated to 120 m.
A familiar but worthy movement
When the top quality Patek Philippe Cubitus replica watches UK was initially launched, some were disappointed to learn it would be powered by the cal. 26-330 S C, the same movement used in the Nautilus. This was seen as yet another detail preventing the Cubitus from having its own identity. I understand the sentiment, but not the disappointment, because movements like the cal. 26-330 S C don’t come around all the time.
The cal. 26-330 S C is essentially an upgraded cal. 324, 2025 imitation Patek Philippe watches’ mainstay automatic since 2004. The new cal. 26-330 S C debuted in 2019 and introduced some welcome technical upgrades including anti-backlash gearing for the indirect center seconds hand and a stop-seconds function.
One of the great things about this movement is its slimness. In fact, at 3.32 mm, it’s just a few tenths of a millimeter thicker than the famed Jaeger-LeCoultre cal. 920 (also known as the Audemars Piguet cal. 2121), which has held the title of being the thinnest full-rotor automatic in the world for more than 50 years. This slimness makes the relatively short 45-hour power reserve forgivable.
Like the older cal. 324, the cal. 26-330 S C features a central sweep seconds hand that is driven indirectly, meaning it is not in the main flow of power. This is a common arrangement, but it results in a common problem: the seconds pinion can wobble between the teeth of the driving wheel, resulting in a jittery seconds hand.
The common solution is a thin copper alloy spring that rides on the seconds pinion, but this creates unwanted friction. With the cal. 26-330 S C, Patek Philippe used an additive manufacturing process called LIGA to fabricate the third wheel with blade-like spring-loaded teeth that squeeze the lobes of the seconds pinion at all times, ensuring perfectly smooth rotation.
Rolex uses the same solution for the cal. 4130 and cal. 4131 chronograph movements used in the Daytona. Like Rolex, Patek Philippe replica watches for sale has a penchant for integrating new technology into legacy platforms, rather than developing all new movements every few years.
The cal. 26-330 is used in several entry level Patek Philippe models including the Aquanaut, Nautilus, and Calatrava, which means annual production is likely in the tens of thousands. This volume necessitates a degree of automation when it comes to finishing, but there appear to be several hand-finished details that elevate it above most of the competition in the industrial haute horlogerie segment.
I’ve said it before, but I’m still impressed by how good these movements look up close considering how many are made. In particular, there are several outward angles with crisp corners, and the screw heads and countersinks are polished brilliantly.
And its beauty is more than skin deep. Patek Philippe has not forgotten that a wristwatch is ultimately a timekeeping instrument, and thanks primarily to the silicon Spiromax hairspring, the cal. 26-330 S C is rated to run between -1 and +2 seconds per day.
Taken together, the slim construction, tidy finishing, and best-in-class chronometric performance make the cal. 26-330 S C a worthy engine for the Patek Philippe Cubitus copies cheap UK watches, despite its short power reserve and ubiquity throughout the brand’s catalogue.
Closing thoughts
Considered on its own, the Cubitus ref. 7128/1G-001 is an objectively well made watch that feels poised on the wrist. Fit and finish are exemplary, and the critical details, namely the faceted edges of the bezel and crystal, are impressively executed. It’s true that the movement isn’t groundbreaking, but aside from its power reserve it leaves little to be desired.
The overt similarity to the Nautilus is arguably a weakness, but the Cubitus, especially in this new 40 mm size, is quite convincing on the wrist. Time will tell, but it seems inevitable that the Cubitus will only become more popular as collectors experience these best-selling Patek Philippe replica watches and get used to their presence in the collection. But if not, it may follow the path of the the short-lived Vacheron Constantin ref. 46004, the similarly shaped square sibling of the recently reborn 222, and become sought-after by future collectors looking for something a little bit different.